The Dual MF Film Holderä for Epson® 4870 and 4990 Scanners
Your Solution for Better Flatbed Scanning of Medium Format Film Strips
Allows you to easily scan two whole strips of 120/220 film frames at one time!
Advantages:
- Designed to work with the:
- Allows you to work faster, more efficiently
and safely with your medium format film
- Allows you to scan two whole strips of
film at once (up to 205 mm in length)
- Be more efficient doing other tasks while the scanner is scanning multiple images
without needing your intervention!
- Makes batch scanning an easy
option for medium format film with the standard EpsonScan software
as well as Silverfast Ai
and VueScan software
- Minimizes the need to reposition your film,
therefore less handling of your film
means less chance of damage from
fingerprints, dropping your film on a dirty surface, etc.
- Infinitely variable scanning length with the T-Lock system (includes 8 T-Locks)
- Adjusts to accept “645”, “6x6”, “6x7”, “6x9” film
- Scan up to 8 “645” frames, 6 “6x6”, 4 “6x7” or 4 “6x9” frames at once when utilizing both film channels (4 “645” frames, 3 “6x6”, 2 “6x7” or 2 “6x9” frames per film channel). Depending on the size of the gap between frames, some 6x7 users may be able to shift the film in the holder in order to then scan a third frame per strip.
- Each of the two film channels can scan 206 mm in one pass from each of the strips and the film channels can accept film strips up to 224 mm in total length.
- Helps maintain flatness with your film even if the film is cut to odd lengths because the T-Lock inserts can be placed at any position within the film channel of the Dual MF Film Holderä . (T-locks do require about 4 mm of frame spacing between frames if you don’t want any masking to occur.)
- Allows you to crop down to just one film frame
in a strip for maximum flatness of that film frame during scanning if so
desired
- Suspends film in the film holding channel at the
same approximate height as the factory Epson® holder
- Allows you to scan panoramic images made
on 120/220 film (While often not necessary, panoramic shooters using 6x12
and larger may wish to consider the optional ANR Insert.)
- No annoying dust or fibers like often produced by ragboard and cardboard
based holders
- No magnetic materials used in its construction (for those who are
worried magnetic materials could potentially affect a scanner’s
performance)
- Accepts 120 and 220 films that meet the ANSI width standards
- Durable
construction that is professionally computer cut using highly
accurate laser technology
- Solid construction – a new three layer construction
that is even more solid than the highly regarded original MF Film Holderä !
New Dual version on the left, original MF
Film Holderä on the right
- Handsome matte finish on upper side
- Pays for itself quickly by allowing you to be more efficient with
your time
- Low cost for a great design – only $64.95!
(holder
and 8 T-Locks)
Click on the following links
for important additional information regarding:
See How it Works!!!! – Using the Dual MF
Film Holderä for Epson® 4870 and 4990 Scannersä
Optional Anti
Newton Ring Glass Insert for the Epson® Film Holders
ORDER NOW - Pricing and Ordering Page
Home Page for All Products
These Flags Represent Some of the Places Where Our
Product Owners
are Located Worldwide!!!
For More Information, e-mail us at: scanning@betterscanning.com
All
information contained in this website ©2024 by DSF OmniCorp, LLC and Doug
Fisher and it may not be reproduced in whole, part or spirit without written
permission
Dual MF Film Holderä Patent Pending